IP Video Systems XP 100 Small Form Factor Encoder/Decoder

Small Form Factor - Single Channel Ultra HD Encoder/Decoder

IP Video System’s V₂D XP 100 is a single channel utlra HD encoder/decoder in a small form factor package designed to facilitate the video streaming and remote deskop sharing collaboration requirements in space-challenged environments.

Single Channel hardware encoder or decoder
Ultra HD 4-megapixel resolution support
Full dual DVI I/O for Local Monitor Loopback
Remote Desktop Video Overlay on Local monitor
Remote Desktop Applicaiton Control with local USB Keyboard/Mouse
Supports and integrates easliy in Ver 3.x Management Server architecture
Fast software switching between encoder/decoder function.

V₂D - Xp 100 Ultra HD Encoder/Decoder

IP Video Systems’ V2D XP 100 is a single channel Ultra HD encoder (Tx) or decoder (Rx) in a small form factor design (6.25” W x 1.75" H x 9.5" D), delivering real-time streaming of above 4 mega-pixel resolution graphics/video with high frame rates and low latency over IP networks .

XP200 med

V₂D XP 100 Single Channel Ultra HD Encoder/Decoder

The V2D XP 100 product incorporates state-of-the-art encoding and decoding technologies optimized for net-centric simulation and high-end visualization applications, integrating video, audio and control data on a robust and easy-to-use platform.

The XP 100, with Ultra HD high resolution video, graphics and audio extender, allows configured locations to view and control the graphics and video in real time. Multiple remote locations can simultaneously view and control the source application using only a display, keyboard, and mouse. In addition the XP 100 Rx supports video windowing and overlay to allow viewing of full screen native or scaled down picture-in-picture (PIP) view of the remote video window on top of local data. Applications include networked simulation, graphics application sharing, and remote surgical intervention.

The V2D XP100 promotes unparalleled video streaming and collaboration capabilities with real-time video and graphics, audio, and remote keyboard/mouse control, creating a completely interactive ex- perience among users on a global basis. The systems can be connected to Ethernet local area networks, campus and metro networks as well as wide area IP networks, supporting networked simulation, distributed visualization, telepresence, and remote TeleCollaboration(TM) over any distance.

The V₂D XP 100 offers unparalleled video streaming and collaboration capabilities, with real-time video and graphics, audio and remote keyboard/mouse control creating a completely interactive experience among users on a global basis.

V₂D XP 100 Ultra HD Encoder/Decoder (Backpanel)

The low-noise, lightweight V2D XP 100 with 1 dual link DVI-I channel supports Tx (encoding) or Rx (decoding) functionality in a set top box form factor. Dimensions: 6.25” x 9.5” x 1.75” (W x D x H). Weight ~3.6 lbs. (Preliminary)

ver3x cover

Product Features

Small set-top box form factor
- 6.25”x9.5”x1.75”(WXDXH)
Portable and light ~ 3.6 lbs (net weight)
Single Channel full Tx or Rx functionality
Ultra HD performance beyond 4-megapixel
- 3840 x 1200, 2560 x 1600, etc
High frame encoding on 2 mega-pixel modes:
- 1280 x 1024 @ 72 fps (frames per sec)
- 1600x1200@ 48fps
- 1920x1080 @48fps
3D stereoscopic graphics support
Dual-link DVI-I input and output
Front SD memory card and USB connectors
Complete remote application control &
interactivity
- USB Keyboard/mouse support
Integrated stereo audio input/output
Dual port Gigabit Ethernet switch
Transmission over any Ethernet network
- IP LAN and WAN configuration
- Unicast/multicast support
Extensive Quality of Service (QoS) support
- Rate limitation and control
Network congestion avoidance mechanisms
- Resilient against packet loss

Benefits

True plug-and-play design
Global visual collaboration
Networked simulation
Broadcast/multicast graphics/video
TeleCollaboration(TM)
Surveillance and reconnaissance
Interventional surgery
Digital cinema
Apple cinema 30” Display support

Applications

Portable design ideal for limited space, low weight, and low noise requirements
Visual decision making on global basis
Digital compression and transmission:
- No distance-dependent degradation
Flexible architecture: Point-to-point ,
Point-to-multipoint (IP multicast)
Complete recording, relay, streaming, and
media distribution solution when configured with IP Video Systems’ Digital Media Servers

V₂D - Xp 100 Functional Diagram

The figure below shows IP Video Sytems TeleCollaboration setup using XP 100s in a real-time desktop/video sharing and remote desktop application control over IP networks. The remote locations is receiving the XP100 transmitted image in real-time (from the remote location on the left) and is shown (on the right) with local monitor loop back and remote imge overlay (PIP).

Small Form Factor design for small space requirements
IP Video Systems’ V2D XP 100 was designed to meet the needs of hi-res video/graphics collaboration applications with limited space.
The XP 100 Small Form Factor chasis 1.75" x 6.25" x 9.5" (H X W X D) offers a smal foortprint but without sacrificing any of the 4-megapixel resolution (2560 x 1600, 3840 x 1200) supported by the other XP family of encoder/decoder products.

V₂D - Xp 100 Technical Specifications

VIDEO

Video resolution
3840 x 1200, 2560 x 1600, 1920 x 1200, 1920 x 1080, 1800 x 1440,
1600 x 1200, 1280 x 720, 1280 x 1024, 1024 x 768, 800 x 600
Horizontal frequency Up to 110kHz
Maximum clock rate 308 MHz
Input/output signal TMDS (DVI-I), RGBHV
Connector type 1 Dual-link DVI-I input , 1 Dual-link DVI-I output
Compression type Advanced visualization with intelligent frame differencing and configurable, progressive spatial compression
Window overlay Remote video window overlay with Picture-in-Picture (PIP) window over local video/PC display.
Script based overlay control commands for instant overlay video on/off, size and position

Audio Line in/out (3.5 mm stereo jack) with local and remote audio mixing

Serial Port RS-232 via USB port adapter

SD/MMC Memory Card Slot for storing configuration data

Keyboard/Mouse 4 USB connectors

Network Interface

Interface type 10/100/1000BaseT with switching
Connector type Two RJ45

Ethernet Protocol

Traffic type Variable bit-rate with configurable maximum and burst rate settings
Frame rate Configurable fixed frame rate settings
IP Protocols IP Parameters manual or automatic configuration via DHCP. Multicast via IGMP with multicast routers
QoS Mechanism coping with packet loss and network latency/jitter. Configurable update rate optimization

Management

Interfaces Telnet, SSL, TFTP, SFTP, SSH
Commands MS web-based management and menu-based system, CLI/API
Configuration data Stored on removable SD/MMC card or Onboard SSD

Certification and Compliances

Safety UL/CSA/EN/IEC 60950-1 CB report
EMC CE ,FCC Part 15 Class A, CISPR 22, ICES-003

General

Power External 12 VDC adapter, 40 W max.
Form factor Two units in 1U rack-mount or desktop
Dimensions 1.75” x 6.25” x 9.5” (H x W x D)
Weight ~ 3 .6 Lbs ( 1.6 Kg) (Preliminary)

(Preliminary Specifications - Subject to Change)